How I Became An Expert on Paving

Why Is It Important to Hire A Contractor To Pave Your Driveway

A driveway that is paved offers a lot of advantages over a driveway made of gravel. You can easily maintain a paved driveway in addition to it looking way lot better. It will also help you avoid your car getting scratched or damaged by a stone or gravel. Having your driveway paved is not an easy job, it is also quite expensive at the same time.

So that is why it is very important that you always look for the services of the best contractor to do the paving of your driveway. And it is very important that you should know what are the things involved in driveway paving in order for you to know what to look for in a bid from a contractor.

The prep work is considered to be the most important factor that you should look into when you are looking to have a paving job on your driveway. It is important that you always make sure that your driveway will be poured on a base that is well prepared. It is important that you should let the contractor that you hired know about this important matter. It is very common that you will receive cheaper bids from companies that will never do this part of the paving job properly. Always remember that if you choose a cheap contractor to do the paving, you will end up with a driveway that will not last long.

The best base of your driveway will need an excavation done with a depth of at least one foot, this will probably cost you a lot of money since having a deep excavation is not simple. The driveway will then need a six to eight inches of mass that will serve as the sub-base. This needs to be done right because this will be the support of the whole driveway. You should make sure that the sub-base is completely compact and that it allows an efficient water drainage. You should always make sure that the bid given by the contractor will include this project and amount of mass and the depth should be specified in the bid.

The base layer is the next part of the paved driveway and it should have a thickness of at least two inches. You should always see to it that the bid given by the contractor will provide the specific numbers regarding the thickness of the base layer which should be at least two inches. If you do not do this, the contractor will only be pouring asphalt that would be about two inches and then will compact it into a smaller amount. Your car will need the support from the base layer of your paved driveway and it should be at least two inches thick.

How I Became An Expert on Paving

The Essentials of Paving – Breaking Down the Basics

Categories: Financial